Adress：Aojiang Town, Pingyang County, Wenzhou City, Zhejiang Province, State Road 104 State Line
Satellite flexographic printing machine production methods, satellite flexographic printing machine in order to make the center of the printing roll and roll printing pattern can always maintain accurate alignment, the center of the roll diameter must be an integral multiple of roll diameter, typically Double or triple. In the existing satellite flexo printing machine, only the single printing plate is arranged on the central printing roller, and the width of the printing plate must be equal to or less than the printing plate perimeter. Therefore, for every rotation of the central printing roller During the process, less than one-half or even one-third of the time and travel can be printed while the other one-half or two-thirds of the time and travel can not be printed, resulting in time, space, mechanical equipment Waste of resources is not conducive to improving the printing speed.
Wenzhou Chuangxin Machinery Co., Ltd. provides a satellite flexo printing machine, which can double the printing speed, to avoid wasting time and space in the printing process, make full use of machinery and equipment resources.
A new type of satellite flexo printing machine includes a central roller, the central roller around the installation of a number of root roller, the diameter of the central roller equal to an integral multiple of each version of the roller, each center of the roller attached to a piece of transfer rubber , Characterized in that each center roller also affixed to a number of pieces of transfer adhesive sheet so that the total number of each center of the transfer roller printing plate equal to the ratio of the diameter of the center roller and the roller diameter, The spread width of the transfer blanket is the same, and from the cross section, the position of each transfer blanket is evenly distributed on the circumference of the center print roll
A better solution to achieve the above purpose is that the diameter of the central printing roller is double the diameter of the printing roller. Two printing blankets are attached to each central printing roller. The position of the two printing blankets is about the center of the central printing roller Center symmetry. Another preferred solution to achieve the above objective is to make the diameter of the center printing roller three times the diameter of the printing plate, three transfer printing plates affixed on each center printing roller, Open the same phase angle.